Mylee The Main Kit

• Quick & easy application
• Lasts up to 3 weeks, chip-free
• Cures in 30–60 seconds under LED Lamp
• HEMA, TPO & vegan cruelty-free
• Removes in 10/15 minutes, damage-free
• Convex Curing Mylee Grande Lamp for flawless results
• Beginner-friendly & professional trusted
• Essential Kit: Prep, Base, Top, Builder, 4 Colours, Grande LED Lamp & Removal
• 90-day money-back guarantee

STEP 1. PREP & PRIME

File nails to shape with the Nail File 180/240 Grit, then gently push back cuticles using the Metal Cuticle Pusher. Lightly buff the nail plate with the Mylee Buffing Block 180 Grit to remove shine, and cleanse with a dash of Mylee 2-in-1 Nail Prep & Wipe on a Lint Free Wipe to remove any oils. If you’re prone to lifting, follow with Mylee Dehydrator* and Mylee Acid-Free Primer*.

STEP 2. BASE COAT

Apply a thin layer of Mylee Base Coat and cure for 60 seconds using the Mylee Grande LED Lamp.

STEP 3. COLOUR

Brush on your favourite Mylee Gel Polish shade and cure for 60 seconds. Build up the opacity in thin coats, curing each layer for a smooth, even finish. Don’t forget to cap the free edge by running some polish along the tip of your nail.

STEP 4. TOP COAT & FINISH

Seal the deal with the Mylee No Wipe Top Coat and cure for 60 seconds. Wash your hands, apply Mylee Nail & Cuticle Oil*, moisturise, and enjoy your salon-quality mani for up to 3 weeks!

*Product sold separately.

STEP 1. BUFF

Buff the surface of your Mylee Gel Polish using the Nail File 180/240 Grit to remove the shine and fully break the Mylee No Wipe Top Coat seal. This step is essential for allowing the remover to penetrate effectively. Use firm, controlled strokes and focus on evenly removing the glossy layer across each nail - there’s no need to file down the colour.

STEP 2. SOAK

Soak a Mylee Lint Free Wipe or cotton pad with Mylee Gel Remover and place it directly onto the nail, ensuring the surface is fully covered.

STEP 3. WRAP & WAIT

Secure each nail with Mylee Gel Polish Soak Off Clips* or foil and leave to soak for 15 minutes. This step is key - giving the remover time to work ensures the gel lifts easily for a gentle, damage-free removal.

STEP 4. GENTLY SCRAPE & RINSE

Remove the wraps and gently press and slide the softened gel away using a Wooden Cuticle Stick or Gel Scraper*. The gel should lift off with ease - avoid forcing or picking. Lightly buff away any remaining product, rinse your hands, and finish with Mylee Nail & Cuticle Oil* to rehydrate and nourish.

*Product sold separately.

Want your mani to go the distance? From prep to polish to removal, these tips will help you get the best results every time.

Prep makes perfect

• Before you apply your Base Coat, lightly buff the surface of each nail using a buffing block. This creates a slightly rough texture that helps the gel adhere properly - no lifting, chipping or peeling here.

Push it real good

• Gently push back cuticles using a wooden or metal cuticle stick or pusher. This gives you a clean edge for application and helps polish last longer. You can also use a cuticle remover to get rid of any dead skin if needed.

Keep it clean

• Use Prep & Shine Wipes to cleanse your nails before you apply gel and to wipe off any tacky residue after your Top Coat cures. They're the multitasking MVP of your gel kit.

Layer it up

• For bold, even colour, apply 2 to 3 thin coats of Gel Polish, curing each layer under your LED lamp for 60 seconds. The same applies to Base and Top Coat. Always cure each coat separately to avoid soft spots, smudging or peeling.

Mind the cure time

• Curing is crucial. Most gel products - including Gel Polish, Base Coat, Top Coat, Builder Gel and Magic Extender Gel - should be cured under an LED lamp for 60 seconds per layer. For more pigmented shades or thicker layers, 90 seconds might be needed.

Seal the deal

• One coat of Top Coat is usually enough, but if you want extra shine and protection, go for two thin layers. Just be sure not to apply too thickly, and cure each coat properly to prevent bubbling or uneven texture.

Sticky? Not for long

• If your nails feel sticky after curing, don’t worry - it’s normal. That tacky layer just needs to be wiped away with an alcohol-based product like our Prep & Wipe. It’ll leave your nails smooth, glossy and ready to go.

Base Coat = staying power

• Your Base Coat acts like an anchor, holding your Gel Polish in place and helping it last. The Top Coat is your shield, locking in shine and colour while protecting your mani from everyday wear.

Protect your polish

• If you're doing manual work, washing up or putting pressure on your hands (think weights at the gym), your mani might take a hit. Wearing latex gloves when you can will help protect your mani and keep your nails looking fresh.

Moisture is key - just not before polish

• Once your gel manicure is done, apply Cuticle Oil daily to keep your nails hydrated and strong. But don’t use hand cream or oil before application - it can create a barrier that stops your polish from sticking properly. Wash and dry your hands before you start, and you’re good to go.

BASE COAT: Bis-HPMA Poly (1, 4 - Butanediol) - 14/Ipdi Copolymer, Tetrahydrofurfuryl Methacrylate, Isobornyl Acrylate, Cellulose Acetate Butyrate, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxypropyl Methacrylate, BHT, CI 60725 [Violet #2].

NO WIPE TOP COAT: Bis-HPMA Poly (1, 4-Butanediol) - 14/Ipdi Copolymer, Hydroxypropyl Methacrylate, Tricyclodecane Dimethanol Diacrylate, Ethyl Trimethylbenzoyl Phenylphosphinate, BHT, CI 60725 [Violet #2].

GEL POLISH COLOURS: Bis-HPMA Poly(1,4-Butanediol)-14/Ipdi Copolymer, Hydroxypropyl Methacrylate, Cellulose Acetate Butyrate, Ethyl Trimethylbenzoyl Phenylphosphinate, Bis-Trimethylbenzoyl Phenylphosphine Oxide, Silica May Contain '+/- CI 77891 [Titanium Dioxide], CI 77491 [Red Iron Oxide], CI 77492 [Yellow Iron Oxide], CI 77510 [Ferric Ferrocyanide CI 77007 [Ultramarine Blue], CI 19140 [Yellow 5 Lake], CI 15850 [Red 6 Lake], CI 74160, CI 45410 [Red 28], CI 45380 [Red 22], CI 47005 [D&C Yellow 10], CI 60730, CI 77266 [Carbon Black], Norbornanediamine/Resorcinol Diglycidyl Ether Crosspolymer, Aluminum Hydroxide, Synthetic Fluorphlogopite, Titanium Dioxide, Tin Oxide, Polyethylene Terephthalate, Acrylates Copolymer, Aluminum, Nylon-6.

5-IN-1 BUILDER GEL: Acrylates Copolymer, Pentaerythritol Tetra (3-Mercaptopropionate), [Bis (4Methylphenyl) Phosphoryl] (Mesityl) Methanone, Dimethicone.

2-IN-1 NAIL PREP & WIPE: Isopropyl Alcohol, Aqua (Water), Parfum (Fragrance), CI 42090 [Blue 1].

GEL REMOVER: Acetone, Aqua (Water), Parfum (Fragrance), Citronellol, CI 60725 [Ext. D&C Violet 2].