Gel Polish - Piping Hot

• Chip-free for up to 3 weeks
• Cures in 60 seconds
• HEMA, TPO & Cruelty free

If you like it hot, hot, hot, this is the polish for you! This neon red nail polish will set temperatures rising, thanks to its vibrant red shade with a pinky-orange undertone. Wear it on your nails and create your own heatwave!

This striking shade is perfect on its own, or use it as a base for original nail art designs. However you wear it, you’ll be sure to turn heads and capture hearts.

• Neon red nail polish
• Pinky-orange undertone
• Create your own heatwave!
• UV/LED curable

Please note: Due to quality variances between different monitors, the colour that appears on your screen may differ from the physical product.

Caution: Keep away from eyes, may cause serious eye irritation. May cause skin irritation or allergic skin reaction. Keep away from children. Mylee Gel Polish is 100% safe and compliant with all UK and EU safety regulations.

Size: 8ml

Product Code: MG0132-8A

STEP 1. PREP & PRIME

File nails to shape and use a Mylee Buffing Block* to gently remove shine from the nail plate. Wipe your nails with a dash of Mylee 2-in-1 Nail Prep & Wipe* on a Lint Free Wipe* to remove any oils. If you’re prone to lifting, apply the Mylee Dehydrator* followed by the Mylee Acid-Free Primer*.

STEP 2. BASE COAT & CURE

Apply a thin layer of your chosen Mylee Base Coat* and cure for 60 seconds using a Mylee LED Lamp*.

STEP 3. COLOUR & CURE

Brush on your favourite Mylee Gel Polish shade and cure for 60 seconds. Build up the opacity in thin coats, curing each layer for a smooth, even finish. Don’t forget to cap the free edge by running some polish along the tip of your nail.

STEP 4. TOP COAT, CURE & FINISH

Apply the Mylee Top Coat* and cure for 60 seconds. If using a regular Top Coat, wipe away the tacky layer with 2-in-1 Nail Prep & Wipe* on a Lint-Free Wipe* after curing, or switch to Mylee No-Wipe Top Coat* to skip this step. Wash your hands, apply Mylee Nail & Cuticle Oil*, moisturise, and enjoy your salon-quality mani for up to 3 weeks!

*Product sold separately.

Want your mani to go the distance? From prep to polish to removal, these tips will help you get the best results every time.

Prep makes perfect

• Before you apply your Base Coat, lightly buff the surface of each nail using a buffing block. This creates a slightly rough texture that helps the gel adhere properly - no lifting, chipping or peeling here.

Push it real good

• Gently push back cuticles using a wooden or metal cuticle stick or pusher. This gives you a clean edge for application and helps polish last longer. You can also use a cuticle remover to get rid of any dead skin if needed.

Keep it clean

• Use Prep & Shine Wipes to cleanse your nails before you apply gel and to wipe off any tacky residue after your Top Coat cures. They're the multitasking MVP of your gel kit.

Layer it up

• For bold, even colour, apply 2 to 3 thin coats of Gel Polish, curing each layer under your LED lamp for 60 seconds. The same applies to Base and Top Coat. Always cure each coat separately to avoid soft spots, smudging or peeling.

Mind the cure time

• Curing is crucial. Most gel products - including Gel Polish, Base Coat, Top Coat, Builder Gel and Magic Extender Gel - should be cured under an LED lamp for 60 seconds per layer. For more pigmented shades or thicker layers, 90 seconds might be needed.

Seal the deal

• One coat of Top Coat is usually enough, but if you want extra shine and protection, go for two thin layers. Just be sure not to apply too thickly, and cure each coat properly to prevent bubbling or uneven texture.

Sticky? Not for long

• If your nails feel sticky after curing, don’t worry - it’s normal. That tacky layer just needs to be wiped away with an alcohol-based product like our Prep & Wipe. It’ll leave your nails smooth, glossy and ready to go.

Base Coat = staying power

• Your Base Coat acts like an anchor, holding your Gel Polish in place and helping it last. The Top Coat is your shield, locking in shine and colour while protecting your mani from everyday wear.

Protect your polish

• If you're doing manual work, washing up or putting pressure on your hands (think weights at the gym), your mani might take a hit. Wearing latex gloves when you can will help protect your mani and keep your nails looking fresh.

Moisture is key - just not before polish

• Once your gel manicure is done, apply Cuticle Oil daily to keep your nails hydrated and strong. But don’t use hand cream or oil before application - it can create a barrier that stops your polish from sticking properly. Wash and dry your hands before you start, and you’re good to go.

Bis-HPMA Poly(1,4-Butanediol)-14/IPDI Copolymer, Hydroxypropyl Methacrylate, Cellulose Acetate Butyrate, Ethyl Trimethylbenzoyl Phenylphosphinate, Bis-Trimethylbenzoyl Phenylphosphine Oxide, Silica May Contain +/- CI 77891 [Titanium Dioxide], CI 77491 [Red Iron Oxide], CI 77492 [Yellow Iron Oxide], CI 77510 [Ferric Ferrocyanide], CI 77007 [Ultramarine Blue], CI 19140 [Yellow 5 Lake], CI 15850 [Red 6 Lake], CI 74160, Ci 45410 [Red 28], CI 45380 [Red 22], CI 47005 [D&C Yellow 10], CI 60730, CI 77266 [Carbon Black], Norbornanediamine/Resorcinol Diglycidyl Ether Crosspolymer, Aluminum Hydroxide, Synthetic Fluorphlogopite, Titanium Dioxide, Tin Oxide, Polyethylene Terephthalate, Acrylates Copolymer, Aluminum, Nylon-6

*Ingredients are subject to change due to regulatory/formulation changes. For the most complete and up-to-date list of ingredients, please refer to the product packaging.

Store your Mylee gel nail polishes in a cool, dark place and do not expose them to sunlight as this can cause discolouration, fade the pigment, and pre-cure the nail lacquer, reducing the maximum quantity of nail polish in the bottle.