How To Fix N Flash Tips

    Pro tip:

    You Will Need The Following:

    Step By Step Guide

    Apply

    1. Push back your cuticles, file, buff and cleanse your nails.

    2. Apply a small amount of Mylee Fix 'N' Flash Gel both on the nail and tip contact area.

    3. Place the Tip on the nail firmly, making sure there are no bubbles, or gel on the skin.

    4. While pressing, flash cure for 15 seconds under the Mylee Pro LED Lamp, or cure for 30 seconds in the Mylee UV Lamp. Repeat for each nail.

    5. Then, cure all nails with the Mylee Pro Lamp for 60 seconds, or under the UV Lamp for 120 seconds. 

    6. Follow by buffing and cleansing the nail and applying your favourite Mylee gel polish colour and Top Coat.

    Remove

    1. Use The Shortie Nail Extension Clipper to cut down the length of your Fix 'N' Flash extensions.

    2. Take a Mylee Half Moon Nail File and use the 100 grit side to buff the polish that's on your nail.

    3. Take a nail wipe and soak it in Gel Remover or 100% Acetone and secure it onto your nail with a Soak Off Clip or foil wrap.

    4. Wait for 10-15 minutes and remove the wrap or clip. Then, using a gel scraper or wooden cuticle stick, gently push away the polish and jelly like tip from your nail bed.

    5. If there's any product remaining on the nail, re-buff and re-wrap the nail.

    6. Once all the product is removed, wash your hands thoroughly.

    Discover more guides